Zinc Earthing Anode
APPLICATION
These products are used for two main purposes:
Instead of a copper grounding rod to avoid bi-metallic corrosion of associated ferrous structures
To mitigate voltages induced onto the pipelines from overhead AC power lines. The pipeline can be grounded using these electrodes, without disruption to the cathodic protection current
ZINC EARTHING ELECTRODE (DOUBLE) DATA
Size bare:2 no 35 x 35 x 1525mm c/w 12mm diameter M.S. core extending 25mm at one end
Size packaged:165mm diameter x 1700mm length
Cable:
1 x 25mm, 2 XLPE/PVC (black) x 5m length (or to client specification)
Weight:70kgs (154lbs)
ZINC EARTHING ELECTRODE (SINGLE) DATA
This product combines two zinc reference cells, insulated from one another. One electrode would
typically be connected to the protected structure, the other to an earthing device. The electrodes are surrounded by low resistivity backfill allowing largestray currents to pass between them. The enables the structure to be earthed to ground with providing a direct connection.
Size bare:1 No 35 x 35 x 1525mm c/w 12mm diameter M.S. core extending 25mm at one end
Size packaged: 120mm diameter x 1700mm length
Cable:1 x 25mm, 2 XLPE/PVC (black) x 5m length (or to client specification)
Weight:35kgs (77lbs)